Go to Logpoint Help Center and download the required patch update file provided in .pak format.
Go to Settings >> System Settings from the navigation bar and click Updates.
Click Upload Patch.
Browse to the previously downloaded patch update file and click Upload.
Click the Install Update icon in Actions.
You can also upload the patch update files using the uploadpatch li-admin command before installing it from the UI. Go to uploadpatch for more information.
Logpoint uses Netplan for network configuration starting from version 7.2.0. If your network configurations have not been migrated, it is recommended that you configure Netplan. Go to Netplan Migration in Logpoint for more details.
You can verify the installed version from Help >> About Logpoint in the navigation bar.
The following table lists the dependencies for each Logpoint version.
Version |
Can be installed on |
|---|---|
7.6.1 |
7.6.0 |
7.6.0 |
7.5.0, 7.5.1 |
7.5.1 |
7.5.0 |
7.5.0 |
7.4.0, 7.4.2 |
7.4.2 |
7.4.0 |
7.4.0 |
7.3.0, 7.3.1 |
7.3.0 |
7.2.0, 7.2.1, 7.2.2, 7.2.3, 7.2.4 |
7.2.4 |
7.2.0, 7.2.1, 7.2.2, 7.2.3 |
7.2.3 |
7.2.0, 7.2.1, 7.2.2 |
7.2.2 |
7.2.0, 7.2.1 |
7.2.1 |
7.2.0 |
7.2.0 |
7.1.0, 7.1.1, 7.1.2, 7.1.3 |
7.1.3 |
7.1.0, 7.1.1, 7.1.2 |
7.1.2 |
7.1.0, 7.1.1 |
7.1.1 |
7.1.0 |
7.1.0 |
7.0.0, 7.0.1, 7.0.2 |
7.0.2 |
7.0.0, 7.0.1 |
7.0.1 |
7.0.0 |
You can see the status of each update from Settings >> System Settings >> Updates.
If your CPU doesn’t support AVX you won’t be able to install Logpoint 7.5.0. Check if your CPU supports AVX using the following command:
grep avx /proc/cpuinfo
If there is no output after running the command, your CPU doesn’t support AVX.
Logpoint 7.3.0 patch upgrade requires Netplan for network configuration. Logpoint automatically migrates to Netplan during the v7.2.0 upgrade, but in some unsuccessful cases, manual migration is required. To learn how to migrate, go to Netplan Migration in Logpoint.
Due to the large size of the patch file, you must upload it from the console using the uploadpatch command before installing it from the UI.